OpenVox GSM Card Setup Asterisk
First edit extra-channels.con to get the channel and group info.This file is generated when the card is detected.
If you need to set a route per channel then you will need to change the channel ID or create a goupe for multiple channels the file will have the following for each GSM Module
; Span 6: opvxg4xx/0/2 "OpenVox G400P GSM/CDMA PCI Card 0"
group=1
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=on
tty=off
;pin=1234
channel => 15
context = default
group = 63
Then create a custom trunk in FreePBX and
Custom Dial String: extra/g1/$OUTNUM$
or for channel specific you can use extra/15/$OUTNUM$ for gsm-1
If you need to set a route per channel then you will need to change the channel ID or create a goupe for multiple channels the file will have the following for each GSM Module
; Span 6: opvxg4xx/0/2 "OpenVox G400P GSM/CDMA PCI Card 0"
group=1
context=from-gsm
signalling = gsm
smscodec=utf-8
debugat=on
tty=off
;pin=1234
channel => 15
context = default
group = 63
Then create a custom trunk in FreePBX and
Custom Dial String: extra/g1/$OUTNUM$
or for channel specific you can use extra/15/$OUTNUM$ for gsm-1
